2007.9-2011.6：青岛大学纺织工程系，学士

2011.9-2017.6：东华大学纺织材料系，博士（硕博连读）

2014.9-2016.9：美国特拉华大学机械工程系，博士（联合培养）

工作经历

2017.09-至今：东华大学纺织学院，讲师

2017.10-至今：东华大学材料科学与工程流动站，博士后

承担省部级项目3项，国际合作项目1项。

在研项目：

1.上海市青年科技英才扬帆计划项目，18YF1400400，3D打印碳纳米管增强复合材料制备及其残余应力原位消除机理，2018/05-2021/04，在研，主持

2.中央高校基本科研业务费专项资金学科交叉重点培育项目，2232018A3-11，基于声发射的增材制造纺织结构预制件的在线检测与质量控制，2018/01-2020/12，在研，主要参与人

已结题项目：

1.韩国教育科学技术部Global Research Laboratory(GRL)项目, Additive Manufacturing of Multi-Directional Preforms and   Composites: structural design, fabrication, and characterization，2013/06-2016/05，已结题，参加

2.上海市科委科技攻关项目，12521102400，新能源汽车典型结构件先进立体编织工艺与设备的开发，2012/07-2014/06，已结题，参加

代表论文

主要从事纺织材料、纺织复合材料、纺织品增材制造研究。研究成果发表在Materials   Today，Composites Science and Technology等国际著名期刊上，单篇最高IF为24.537。受邀撰写英文专著1部。已获授权中国发明专利4个。担任Composites Science and Technology,   Composites Part A, Composites Part B, Composite Structures, Polymer   Composites等SCI期刊特约审稿人。

近五年代表性论文：

1.Z. Quan, A. Wu, et al. “Additive   manufacturing of multi-directional preforms for composites: opportunities and   challenges”, Materials Today, 18(9), 503-512 (2015).

2.李伟文, 权震震, et al. “MWCNTs/PAN微纳米纤维膜的制备及其层合板的电磁屏蔽性能”, 东华大学学报(自然科学版),   41(06), 723-729 (2015).

3.Z. Quan, Z. Larimore, et al.   “Microstructural design and additive manufacturing and characterization of 3D   orthogonal short carbon fiber/acrylonitrile-butadiene-styrene preform and   composite”, Composites Science and Technology, 126, 139-148 (2016).

4.Z. Quan, Z. Larimore, et al.   “Microstructural characterization of additively manufactured multi-directional   preforms and composites via X-ray micro-computed tomography”, Composites   Science and Technology, 131, 48-60 (2016).

5.W. Zhang, Z. Quan, et al. “Characterization   of residual stress and deformation in additively manufactured ABS polymer and   composite specimens, Composites Science and Technology, 150, 102-110 (2017).

6.Z. Quan, J. Suhr, et al. “Printing   direction dependence of mechanical behavior of additively manufactured 3D   preforms and composites”, Composite Structures, 184, 917-923 (2018).

7. Q. Gu, Z.   Quan, et al. “Structural modeling and mechanical characterizing of three-dimensional   four-step braided composites: A review”, Composite Structures, 207, 119-128   (2019).

专利专著

已授权专利：

1.覃小红, 权震震,   阎建华, 俞建勇. 一种混杂3D编织预制件. ZL 2014 2 0271818.2

2.覃小红, 权震震,   阎建华, 俞建勇. 一种混杂三维编织预制件的制备方法. ZL 2014 1 0225605.0

3.阎建华, 权震震,   俞建勇, 覃小红. 一种3D编织二合板型纤维混杂预制件及其制备方法. ZL 2015 1 0140894.9

4.阎建华, 权震震,   俞建勇, 覃小红. 一种3D编织多合板型纤维混杂预制件及其制备方法. ZL 2015 1 0170815.9

代表性专著：

1.Z. Quan and T.-W. Chou. “Additive Manufacturing of Multi-Directional   Preforms and Composites: Microstructural Design, Fabrication, and   Characterization”, in Mechanics of Materials Volume IV Measurement and   Applications, series edited by C.-H. Hsueh, volume edited by K. K. Chawla and   N. Chawla, Springer-Singapore (2018).

Composites Science and   Technology, Composites Part A, Composites Part B, Composite Structures,   Polymer Composites等SCI期刊特约审稿人

国际交流

美国特拉华大学机械工程系访问学者