Silica aerogels are sol-gel-derived materials consisting of interconnected nanoparticle building blocks that form an open and highly porous three-dimensional silica network. Flexible aerogel films could have wide applications in various thermal insulation systems. However, aerogel thin films produced with a pure sol-gel process have inherent disadvantages, such as high fragility and moisture sensitivity, that hinder wider applications of these materials. We have developed synthesis and manufacturing methods to incorporate electrospun polyurethane nanofibers into the cast sol film prior to gelation of the silica-based gel in order to reinforce the structure and overcome disadvantages such as high fragility and poor mechanical strength. In this method, a two-stage sol-gel process was employed: (1) acid-catalyzed tetraethyl orthosilicate hydrolysis and (2) base-catalyzed gelation. By precisely controlling the so! gelation kinetics with the amount of base present in the formulation, nanofibers were electrospun into the sol before the onset of the gelation process and uniformly embedded in the silica network. Nanofiber reinforcement did not alter the thermal conductivity and rendered the final composite film bendable and flexible.