Polyacrylonitrile nanofibers were produced using the electrospinning method and dyed with a basic dye alongside regular polyacrylonitrile fibers. In order to investigate the effect of high surface area to volume ratio of nanofibers on their adsorption behavior in comparison with regular fibers, the dyeing conditions for both types of fibers were kept just the same. Physiochemical parameters of dyeing such as adsorption isotherm, standard affinity, enthalpy change, rate of dyeing constant, diffusion coefficient, and activation energy of diffusion were investigated for both types of fibers. The results showed that the adsorption process can be well described with the Langmuir adsorption isotherm for both types of fibers whereas the standard affinity of dye to nanofibers was higher than regular fibers and the higher negative values of enthalpy changes were obtained for regular fibers. The nanofibers rate of dyeing was faster than regular fibers with higher amounts of diffusion coefficients and lower amounts of activation energy of diffusion. This study also revealed that in spite of the approximately same amount of dye exhaustion for both types of fibers, the color strength of regular fibers was noticeably higher than nanofibers.