Electrospun polyvinylidene fluoride (PVDF)-containing carbon nanotubes (CNT) were prepared for use in fabricating actuator materials. Actuating displacement was measured in an electrochemical environment. The electrospun nanofibers were arranged using a drum-type collector, and morphology was investigated using a field emission-scanning electron microscope. The uniformity of dispersion of CNT in the PVDF nanofibers was monitored by electron probe X-ray micro-analysis. Tensile strength and electrical resistivity results were used as an indication of the state of alignment. The electrospun CNT/PVDF nanofiber sheets exhibited better mechanical and electrical properties in the arranged direction. The efficiency and electrical capacities of electrospun CNT/PVDF nanofiber sheet were compared with those of cast PVDF sheets for use in actuator applications in electrochemical environments. The electrospun CNT/PVDF nanofiber sheets exhibited much better actuator performance than PVDF sheets, which are attributed to their superior electrical properties.