Increasing mechanical strength of gelatin-based materials is required to expand the range of their applications, which is desirable because of biocompatibility, biodegradability, and low cost of gelatin. The effect of aluminum potassium sulfate on preparation and properties of nanofibrous gelatin were investigated. Samples were electrospun from 10M aqueous acetic acid and analyzed by scanning electron microscopy (SEM), Fourier transform infrared microscopy (FTIR), energy-dispersive x-ray analysis (EDX), and tensile test. The addition of AlK(SO4)(2) considerably increases the elastic modulus of the material up to about 10% salt content. The elastic modulus of electrospun gelatin meshes prepared as described in the present work increased from 20 MPa to 70 MPa and the elastic modulus of the fiber material increased from 150 MPa to 620 MPa as the salt content in the fibers increased from 0% to 9.6%. (C) 2015 Wiley Periodicals, Inc.