In this paper, we present the preparation and properties of a unique material system manufactured by electrospinning of co-polyamide 6,12 (coPA) froman n-propanol solution. A significant advantage of this system is that n-propanol is considered a safe organic solvent. According to the literature, no polymers have been electrospun from this solvent until now. The co-polyamide nanofibers were modified using cellulose nanocrystals, which were prepared by a simple one-step method from date palm leaves. This was done to enhance their mechanical properties and increase their hydrophilicity. The addition of 1 wt% of cellulose nanocrystals improved the Young's modulus by 224% and the tensile strength of the composites by 110%. The electrospun coPA fibers showed a significantly higher hydrophobicity than spin-coated foils. The contact angle of water measured on an electrospun mat was 134 degrees, whereas the contact angle measured on a coPA foil was 84 degrees. Selected freestanding coPA electrospunmatswere tested for their potential as membranes for vegetable and diesel oil extraction from oil/water mixtures. High sorption efficiency of up to 98% was demonstrated. (C) 2017 Elsevier Ltd. All rights reserved.