The aim of this study was to prepare electrospun polyvinylpyrrolidone (PVP)/2-hydroxypropyl-beta-cyclodextrin (HP beta CD) nanofiber mats and to incorporate plai oil (Zingiber Cassumunar Roxb.). The plai oil with 10, 20 and 30% wt to polymer were incorporated in the PVP/HP beta CD solution and electrospun to obtain nanofibers. The morphology and structure of the PVP and PVP/HP beta CD nanofiber mats with and without the plai oil were analyzed using scanning electron microscopy (SEM). The thermal behaviors of the nanofiber mats were characterized using differential scanning calorimeter (DSC). Terpinen-4-ol was used as a marker of the plai oil. The amount of plai oil remaining in the PVP/HP beta CD nanofiber mats was determined using gas chromatography-mass spectoscopy (GC-MS). The SEM images revealed that all of the fibers were smooth. The average diameter of fibers was 212-450 nm, and decreased with the increasing of plai oil content. The release characteristics of plai oil from the fiber showed the fast release followed by a sustained release over the experimental time of 24 h. The release rate ranged was in the order of 10% > 420% similar to 30% plai oil within 24 h. Electrospun fibers with 20% plai oil loading provided the controlled release and also showed the highest plai oil content. Hence, this electrospun nanofiber has a potential for use as an alternative topical application.