Ag-doped In2O3 nanofibers with diameters ranging from 60 to 130 nm and lengths of several tens of micrometers were synthesized by an electrospinning method. The XRD results indicated that the dopant in the nanofibers was metal Ag. The sensor fabricated from these fibers exhibited excellent HCHO sensing properties at 115 degrees C. The sensitivity was up to 3 when the sensor was exposed to 5 ppm HCHO, and the response and recovery time were about 5 and 10 s, respectively. Good selectivity was also observed in our investigations. These results indicated that the Ag-cloped In2O3 nanofibers could be used to fabricate high performance HCHO sensors in practice. (C) 2009 Elsevier B.V. All rights reserved.