400-8910-119
首页 > 文献资料 > ES-Bank > 详情
Electrospun La0.8Sr0.2MnO3 nanofibers for a high-temperature electrochemical carbon monoxide sensor
2019/11/27 21:19:35 Zhi, M. J., A. Koneru, F. Yang, A. Manivannan, J. Li and N. Q. Wu
Lanthanum strontium manganite (La0.8Sr0.2MnO3, LSM) nanofibers have been synthesized by the electrospinning method. The electrospun nanofibers are intact without morphological and structural changes after annealing at 1050 degrees C. The LSM nanofibers are employed as the sensing electrode of an electrochemical sensor with yttria-stabilized zirconia (YSZ) electrolyte for carbon monoxide detection at high temperatures over 500 degrees C. The electrospun nanofibers form a porous network electrode, which provides a continuous pathway for charge transport. In addition, the nanofibers possess a higher specific surface area than conventional micron-sized powders. As a result, the nanofiber electrode exhibits a higher electromotive force and better electro-catalytic activity toward CO oxidation. Therefore, the sensor with the nanofiber electrode shows a higher sensitivity, lower limit of detection and faster response to CO than a sensor with a powder electrode.
  • Journal: Nanotechnology
  • Volume: 23
  • Issue: 30
  • Pages:
  • ISSN: 0957-4484
  • DOI: 10.1088/0957-4484/23/30/305501
  • Year: 2012
  • Number:
  • Type:
相关推荐
暂无相关推荐
网友评论 请遵循相关法律法规,理性发言
回复
查看更多回复

分享

为了更好的浏览体验,请使用谷歌,360极速,火狐或Edge浏览器