400-8910-119
首页 > 文献资料 > ES-Bank > 详情
Fabrication of polycrystalline lanthanum manganite (LaMnO3) nanofibers by electrospinning
2019/11/27 21:19:25 Zhou, X. F., Y. Zhao, X. Y. Cao, Y. F. Xue, D. P. Xu, L. Jiang and W. H. Su
Lanthanum manganite (LaMnO3) nanofibers were successfully fabricated by electrospinning utilizing sol-gel precursors. Polycrystalline cubic-perovskite structure LaMnO3 fibers of 50-100 nm were obtained by calcination of the inorganic/organic hybrid fibers at 600 degrees C for 1 h. The XRD results showed that the grain size of the fibers increased significantly with the increase of calcinations temperature. The average diameter of crystal grains was 17 nm after calcined at 400 degrees C for 2 h, then grew to 20 nm after heated up to 600 degrees C for 1 h. The morphology, microstructure, crystal structure and thermal analysis were investigated by SEM, TEM, XRD and TG-DSC, respectively. (c) 2007 Elsevier B.V. All rights reserved.
  • Journal: Materials Letters
  • Volume: 62
  • Issue: 3
  • Pages: 470-472
  • ISSN: 0167-577X
  • DOI: 10.1016/j.matlet.2007.05.063
  • Year: 2008
  • Number:
  • Type:
相关推荐
暂无相关推荐
网友评论 请遵循相关法律法规,理性发言
回复
查看更多回复

分享

为了更好的浏览体验,请使用谷歌,360极速,火狐或Edge浏览器